• Part Number: 2705B
• 750VAC/1000VDC, 10AAC/10ADC
  
• One-handed operation
  
• Magnetic hanger for hands-free operation
• Auto/manual ranging
• Auto power-off to conserve battery life
• Measures up to 10A (AC, DC)
• AC voltage to 750V
• DC voltage to 1000V
• Resistance to 40 MOhms
• Performs continuity test
• Performs diode test

• DC Volts:
• Ranges: 400 mV, 4 V, 40 V, 400 V, 1000V
• Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
• Accuracy;±(1.0 % rdg + 2 dgts)
• Input Impedance: 400 mV: >100 MΩ; 4 V: 10 MΩ; 40 V to1000 V: 9.1 MΩ
• Overload Protection: 1000 VDC or 750 VACrms
• AC Volts (50 Hz-500 Hz):
• Ranges: 400 mV, 4 V, 40 V, 400 V, 750V
• Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
• Accuracy: 50 Hz to 100 Hz ±(2.0 % rdg + 5 dgts)
• Input Impedance: 400 mV: >100 MΩ; 4 V: 10 MΩ; 40 V to 750 V: 9.1 MΩ
• Overload Protection: 1000 VDC or 750 VACrms
• DC Current:
• Ranges: 400 uA, 4000 uA, 40 mA, 400 mA, 10 A
• Resolution: 0.1 uA, 1 uA, 10 uA, 100 uA, 10 mA
• Accuracy: 400 uA to 400 mA ranges: ±(2.0 % rdg + 2 dgts); 10 A range: ±(3.0 % rdg + 3 dgts)
• Input Protection 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
• 10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period
• AC Current (50 Hz-500 Hz):
• Ranges: 400 uA, 4000 uA, 40 mA, 400 mA, 10 A
• Resolution;  0.1 uA, 1 uA, 10 uA, 100 uA, 10 mA
• Accuracy: 400 µA to 400 mA ranges: ±(2.5 % rdg + 5 dgts); 10 A range: ±(3.5 % rdg + 5 dgts)
• Input Protection: 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
• 10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period
• Resistance:
• Ranges: 400 Ω, 4 kΩ, 40 kΩ, 400 kΩ, 40 MΩ
• Resolution: 0.1 Ω, 1.0 Ω, 10 Ω, 100 Ω, 10 kΩ,
• Accuracy: 400 Ω to 400 kΩ ranges: ±(1.5 % rdg + 4 dgts); 4 MΩ range: ±(2.5 % rdg + 4 dgts); 40 MΩ range: ±(5.0 % rdg + 4 dgts)
• Open Circuit Voltage (typical):  -0.45 VDC (-1.2 VDC on 400 Ω range)
• Overload Protection: 500 VDC/ACrms
• Diode Test:
• Test Current: 1.0 mA (typical)
• Resolution; 10 mV
• Accuracy; ±(3.0 % rdg + 3 dgts)
• Audible Indication: <0.25 V
• Open Circuit Voltage: 3.0 VDC (typical)
• Overload Protection: 500 VDC/ACrms
• Continuity:
• Audible Indication Less than: 25 Ω
• Response Time: 500 ms
• Overload Protection:  500 VDC/ACrms
• General:
• Display: 3 3/4 digit, 4000 count LCD
• Polarity: Automatic, positive implied, negative polarity indication
• Overrange: OL or -OL is displayed
• Low Battery Indication: Battery symbol will display when battery voltage drops below operating levels
• Measurement Rate: 2 times per second
• Auto Power Off: Approximately 10 minutes
• Operating Environment: 0ºC to 50ºC at <70 % relative humidity
• Storage Environment: -20ºC to 60ºC at 0 to 80 % relative humidity
• Accuracies Stated accurac:  at 23ºC ±5ºC at <75 % relative humidity
• Temperature Coefficient: 0.1 x (specified accuracy) per ºC. (ºC to 18ºC, 28ºC to 50ºC)
• Power: Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
• Battery Life: 200 hours typical
• Dimensions: 165 mm (H) x 78 mm (W) x 42.5 mm (D)
• Weight Approximately: 10 oz. (285 g) with battery and hanger
• Supplied Accessories: User manual, one set of test leads, one spare fuse, and 9V battery (installed)

• (1) 2705 - Handheld Digital Multimeter
• (1) Set of Test Leads
  
• (1) Spare Fuse
• (1) 9V Battery, Installed
• (1) User Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice